Power Steering

[brad_zuki]

Hey ive got a pump and brakets from a 1.6.... now my question is what do i get a double grouve pully off of that will fit my stock 1.3? its got a 4 bolt pattern...

[Canadian_zuk]

HAHAHAHA, good luck. I do have a double-v pulley from a factory, a/c equipped Sami. I was keeping it for my OBA setup I'll never install.:( What's it worth to ya?

another option is to weld a second pulley to your single-v.

GL

-CZ

[zc911]

or covert to the serpentine setup, jut need the alternator pulley, wayer pump pulley, and crank pulley. go yank em of a tracker in a yard

[john1974]

Heres a good writeup that will help you out. used a double pully off a 1.6 tracker for his sammy.


http://www.zuknation.net/zuknation/ZN/modules.php?name=Forums&file=viewtopic&t=585&sid=b408fec03c571eafe50de8513da2d94f

[brad_zuki]

awsome thanks that is exactly what im going to do!

[john1974]

no problem. ;)

[neb]

which pump do you use, i have blown out 2 sidekick pumps, they never last more than 1 trip out before they blow the seal out of the front of the pump.
I have a z-bar and my steering wheel never get yank out of my hands. It shuld have bad bump steer like every other zuk, my don't i figue the pump is taking all the punishment and the pressure of holding back the bump steer is poping seals? Thats my guess anyway, when i go with ott steering mybe i'll put my last kick pump in.

[TheSarg]

If u went hi steer and ran a steering stabalizer i bet u wouldnt have that problem.

[brad_zuki]

yea thats what i run... ott steering and a stabilzer