brake questions

[zc911]

so i am trying to get my brake system done and i am running into some trouble finding the parts i need.
The chassis is an 88.5 so it has 2 lines running to the back, that go into a box on the frame rail, and a sigle line out to the axle.
I cannot for the life of me find a metric T fitting to connect the line off the frame, and the left and right caliper lines on the axle.

So, first, does anoyne know where to get that metric T fitting to connect the 3 lines?

Second, if not, can i get rid of that "box" on the frame rail and drop 2 soft lines off the frame, one for the left and one for the right rear calipers?
I do have an adj. proportioning valve already for front/rear bias

HELP :rant: :D

[Depot]

u can get metric t fittings from toyota.. they come on rear axels on 7x something to 85 that i know of fer sure.

gl

D

[zc911]

yup thanks, jut foudn that out yersterday :D

What about that box on the frame rail in the rear that 2 brake lines go into and come out as one, can i get rid of that?

[Fullload]

I think so, but have not tried it myself. Why would it hurt, thats the way suzuki did it for the earlier years, but they crosses the lines at the master so that if you blew a line either front or rear the opposing corners would work ( always one front and one rear)