master cylinder

[gilligan]

i did a quick search to see if anyone upgraded their master brake cylinders to something bigger. everything i found was about switching a Honda cylinder into a sammi. I'm just wondering if the same thing would go into a tracker, or if the sammi and tracker master cylinders are different. right now I'm not super happy with my braking performance (the pads have been changed and i bled it properly), and eventually I'm going with a SAS with Toyota axles. i picked up a toy master cylinder and brake booster today, but its a little bigger, so i would need to drill new holes in the firewall and trim the "shock tower" to fit it. thats not a big deal since the shock towers not going to be used after the SAS anyways.

any opinions?

[Depot]

heep grand cherokee.. direct bolt in for kick and sammy... dual chamber with 1" bore... runs 4wheel disk no sweat with chevy and yota calipers.


gl

D

[gilligan]

ok thanks. wasnt sure if the sammi and kicks were the same. im jsut going to the stock yota axles with stock rotors in front and drums in the back

[lil beast]

What years depot? I think im gona do the same.

[gilligan]

does it use the same booster, or do i need that too? and if its different, does the body need any trimming to fit it?

last question is: whats all the otehr stuff thats mounted to the master cylinder in my tracker? theres a brass thing and then a steel (or something) cylinder mounted left to right under the master cylinder

[Depot]

use the sammy booster but u'll need the heep master and push rod. the heep push rod is adjustable so it will take a few tries to find the rite setting.

what year? I dunno anymore.. i know i've posted here b4 bout it..

http://www.zookpower.ca/forums/showthread.php?t=1917&highlight=master+booster

theres a few times I posted bout the heep MC but no where did I mention the year - go figure

btw, u'll want the proportioning valve from the heep MC too.

gl

D

[gilligan]

is that brass thing the proportioning valve? if it is, whats the thing under it? i tried going out to take a pic, but its too dark in the garage and i would have to pull off the air box to get a good picture.