PDA

View Full Version : WTB: 3" suspension lift (tracker/sidekick)


crnolic
January 9th, 2009, 02:17 PM
I"m looking for 3" lift, anyone know anywhere where i can get one,
i was gonna go with boondox but they're out of them and wont have them for a few months. I dont really wanna shell out 1000 for the calmini. any other suggestions? OME i've also looked into but they dont have a 3" unless you wanna add spacers which i'd prefeer not to do,
thanks
amer
twistedzuki
January 9th, 2009, 04:37 PM
low range has replacement struts, shocks and coils......
crnolic
January 9th, 2009, 07:49 PM
i called them eariler, i think it was you who told me to call them this morning
all they got is OME and he said i can get 3" with ome springs and spacers.
twistedzuki
January 10th, 2009, 09:24 AM
I have used OME stuff many times on trackers and the struts are awsome....and the springs never seem to sag....quality stuff..
Dale.E
January 10th, 2009, 02:02 PM
To do a 3" properly you have to do a front diff drop to relive cv angles. stock cv's can take 2" but 3" and they are under too much stress.
because of this you will spend at least 1000$ to do 3" with full springs no spacers and do it properly.

I would recomend canadian:
http://www.zukination.com/suspension.htm

3" lift Price: $899.00

Options available for 3” lift:

Front diff drop bracket set $175.00 unless your only mall crawling do this!!
Rear suspension links $175.00/pr maximzies flex
Rear drive shaft spacer $39.99 should be done.

NOW THAT SAID!!!!!!!!!!
look at their 4" kit instead, has it all those parts and done ace right and cheaper than the 3" + all the options.
Thats the way I would go!
Bman505
February 4th, 2009, 03:46 AM
I picked up a 2" suspenion lift from masterkit1 in Quebec.
At first I thought it was a little pricey at $360 taxes in delivered to my door. After looking at the kit, I have to say that I would buy it again, as it is heavy duty, and very well thought out. Even the instructions were very clear!
projectTractor
February 20th, 2009, 08:34 AM
i may have all the peices for a 2" suspension lift..

front strut 2" lowering brackets, front and rear coil spring spacers, and all you would have to do it purchase some crown vic shocks (about 25bucks/each)

send me a pm